The 7 Best Air Impact Wrenches [Quality]

We reviewed over 20 air impact wrenches and found the best 1/2 air impact wrench to be the Ingersoll Rand 2235TiMAX.

At Hack My Garage, we don’t simply put the highest ticket items at the top. We spend hours researching the best options available and layout the good and the bad making your life easy.

The Ingersoll Rand 2235TiMAX is a heavy-duty air impact wrench meant for professionals. Ingersoll Rand creates some of the best tools that last the test of time, it’s an investment rather than a purchase.

If you’re not a professional, you’ll find better use out of the AIRCAT 1150 which is quite a bit cheaper but will still get the job done.

If you’re looking for a budget or 3/8th air impact wrenches, you’ll find them all reviewed below.

Let’s get started.

The 7 Best Air Impact Wrenches

IMAGEPRODUCTMAX TORQUE PRICE
Ingersoll 2235TiMAX930 ft-lb CHECK PRICE
AIRCAT 1150900 ft-lb CHECK PRICE
Aircat 1056-XL550 ft-lb CHECK PRICE
DEWALT DWMT70774600 ft-lb CHECK PRICE
Ingersoll 3/8-Inch300 ft-lb CHECK PRICE
AIRCAT 1076-XL550 ft-lb CHECK PRICE
Ingersoll Rand 2317G500 ft-lb CHECK PRICE

Best 1/2 Air Impact Wrench

Ingersoll Rand 2235TiMAX

CFM Requirement: 6 CFM (Under Load)

If you’re a professional that needs a heavy-duty 1/2 inch impact wrench, you won’t be disappointed with the Ingersoll Rand 2235TiMAX. It’s the best air impact wrench out there, bar none.

It’s got 1,350 feet-pounds of torque. You won’t have any trouble getting lug nuts and bolts off of rusty cars that you work on day in and day out. Be careful though, it’s so powerful that it can snap small fasteners when applying the final bit of tension. Use a torque wrench at the end to avoid any mishaps.

You’ll enjoy it being smaller than a powered impact wrench, letting you get into tougher to reach areas. When you’re working all day, the last thing you want is your tools causing you annoyances. You also won’t have to worry about charging either.

It’s made right here in the USA, and Ingersoll Rand has been at the forefront of creating the best air impact wrenches for decades. You won’t have to worry about it coming apart on you, it has a 2-year warranty but this tool should last you more than 10 years of constant usage.

This is a heavy-duty impact wrench for a heavy-duty job. It’s made for a professional who needs to get every lug nut and bolt off and on a vehicle as quickly as possible. I wouldn’t advise a hobbyist to pick up the Ingersoll Rand 2235TiMAX, but for everyone else, it’s the best air impact wrench out there.

Pros
  • 1,350 foot-pounds of torque
  • Made in America
  • 2 Year Warranty
Cons
  • Might be too powerful for a hobbyist

Best Runner Up 1/2 Air Impact Wrench

AIRCAT 1150

CFM Requirement: 4.3 CFM (Under Load)

They call the AIRCAT 1150 “Killer Torque”, and for good reason. It’ll be a perfect fit for you if you’re not going to be using your impact wrench 24/7 but still require quality.

It has 1,295 Feet-pounds of loosening torque to get you started. That’ll be more than suitable for getting lug nuts off your truck or car right at home. It’ll be suitable for most professional settings except for extreme circumstances like working on semi-trucks.

The main attraction of this model is that it’s quite a bit cheaper than the Ingersoll Rand 2235TiMAX that took first while still being able to compete in raw power. You’ll lose a negligible amount of torque (30ft.lbs) but the price difference makes up for it.

Getting into hard-to-reach areas will be a breeze, it’s small but fits in the hand well. It comes with a 2-year warranty and purchasers of the AIRCAT 1150 were blown away with the quality that this impact wrench offers.

It’s safe to say if you’re a car hobbyist you can’t go wrong here. If you’re a pro, you’ll be equally satisfied. It won’t make a difference what you do, just be sure to oil it daily and it’ll last you quite a while.

Pros
  • Cheaper and close to the same quality as #1
  • 2 Year Warranty
  • 1,295 (ft-lb) loosening torque
Cons
  • Hard to find any!

Best Air Impact Wrench Under 100

Aircat 1056-XL

Aircat 1056-XL

CFM Requirement: 8CFM (Average Consumption)

With 550 ft-lb maximum torque, this impact wrench is great for any hobbyist looking to dip their toes into the world of air tools. You won’t have to waste precious time and energy getting lug nuts off(and on) your vehicle. You’ll be done in a jiffy once this air impact wrench is part of your arsenal.

It’s even smaller than the first two options on this list making it even better for getting into those hard to reach areas. You’ll enjoy it fitting firm in the hand with its patented grip while you get right to work.

With 3 speeds you can ensure you aren’t over-torquing any lug nuts and breaking fasteners. It’s still recommended to make sure you use a torque wrench to apply the final bit of tension instead of taking any risks.

Be aware that this wrench will require 8CFM from your air compressor, otherwise you’ll run into torque issues. The Aircat 1056-XL isn’t going to be suitable for all-day use in a workshop, but for the enthusiast, it’s going to be more than enough (and a bargain, too!).

Pros
  • More than enough power for working at home
  • Gets into hard to reach areas
  • Bargain!
Cons
  • Not suitable for all-day usage

Best Dewalt Air Impact Wrench

DEWALT DWMT70774

CFM Requirement: Average Air Consumption 5.1 CFM

This impact wrench comes with 600 ft-lb of torque, allowing you to easily get lug nuts off. It won’t replace a professional’s air impact wrench, but it will be perfect to use at home in your garage. You’ll not have to break your back any longer if you decide to change your tires.

Some purchasers mentioned that they did find that their units had air leaks. With air leaking, you’ll have a loss of torque, and this can be a big deal if you’re working in a professional setting.

DeWalt has been a name in the industry for quite some time, but I think the AIRCAT 1150 has the upper hand here for the price. You’re looking for a DeWalt, but this model can’t compete with what the AIRCAT model has to offer.

If you’re dead-set on a DeWalt, this will do you just fine. It’ll be perfect for home usage, I wouldn’t buy it if I was a professional with the air leaking problem reviewers mentioned about this product.

Pros
  • 600ft-lb of torque
  • DeWalt name
Cons
  • Better options out there for the price

Best 3/8th Air Impact Wrench

Ingersoll Rand 2115TiMAX

Ingersoll Rand 2115TiMAX

CFM Requirement: 4CFM.

It’s tiny, coming in at 2.5 pounds and 6 inches. That doesn’t mean it doesn’t have power though with 230 ft-lbs of forward torque. It’ll get lug nuts off and back on in a jiffy without giving you any trouble.

300 ft-lbs of reverse torque help with those pesky, rusted on lug nuts that haven’t been touched in years. You’ll also enjoy the feather-light trigger giving you the precision you need while working.

Do you know who else trusts Ingersoll Rand? NASCAR. If it’s good enough for pitstops, it’ll be good enough for any professional setting. The Ingersoll Rand 2115TiMAX was made for professionals who need long-lasting quality.

Comparatively, the price is a bit high to other options out there. What you’ll love to hear is that purchasers mentioned they’ve been using this impact wrench for 10+ years of everyday use until it finally gave out. Pretty good investment if you ask me!

Purchasers also mentioned that if you do pick up this item, use it on the lowest setting. You’ll be surprised at how strong this little impact wrench can be!

Pros
  • Feather-trigger for precision
  • Tiny, but strong
  • 2 Year Warranty
Cons
  • Might be overkill for hobbyists

Best Budget 3/8th Air Impact Wrench

AIRCAT 1076-XL

CFM Requirement: Average Air Consumption 8 CFM

This impact wrench has a higher CFM requirement than the Ingersoll Rand 2115TiMAX, making it more powerful. It comes in at 550 ft-lb maximum torque which is a lot considering it only comes in at 2.5 lbs.

As with all of AIRCAT’s tools, it comes with a patented grip making this tool easy to handle for longer periods of time. When you’re constantly taking off wheels, your hands can start to feel the impact of the recoil. You’ll have no issue when it comes to comfort with this handle.

Be careful though, while it is tiny, you are still at risk of overtightening and breaking off fasteners. Always use a torque wrench when you’re applying that twisting on the final bit.

The feather-like trigger will make it easy as heck to get any job you need done. It’s great for getting into those tight spots like suspension work.

You’ll save money on the AIRCAT 1076-XL, but it does come at the cost of requiring a compatible compressor. When it comes to being the best 3/8th air impact wrench, this one is up there for contention. It offers a budget price but doesn’t lack any features.

Pros
  • 550 ft-lb maximum torque
  • Easy on the hands
  • Feather-like trigger
Cons
  • Requires 8CFM or better air compressor

Best Air Impact and Wrench Set

Ingersoll Rand 2317G

CFM Requirement: Average Air Consumption 5 CFM

Get distracted for a second while tightening a lug nut with an impact wrench and you’ve done broken the fastener (again). The Ingersoll Rand 2317G is the best air impact and wrench set to get the job done right at home.

What you’ll love about this set is the quality of the Ingersoll Rand brand combining with the impact ratchet that will apply the last bit of tension without stripping the fastener. You won’t need to buy any other tools to strip off every lug nut and bolt off your car.

The impact wrench itself offers 500 foot-pounds of max torque which is going to be ample for any home situation. The air ratchet allows for 55 foot-pounds of torque to ensure you get those lug nuts on without doing any damage. It’s so good even a professional would find these tools useful.

To sweeten the deal, it also comes with 6 sockets should you need to get into hard-to-reach areas with some extra torque. Overall, whether you’re a newbie or a professional, you’ll find use out of the Ingersoll Rand 2317G air impact wrench and ratchet set.

With Ingersoll Rand’s brand behind these tools, I wouldn’t worry when it comes the quality.

Pros
  • Won’t need to worry about overtightening any fasteners
  • Ingersoll Rand, ‘Nuff said
Cons
  • Hard to find any!

About Roy Cohen

I'm Roy, founder of Hack My Garage. I started out like most not knowing how to hammer a nail, but now I know more than most people about home improvement and DIY. I want to spread my wealth of knowledge with the world and hope to make it a better place.