The 9 Best Hole Saw Kit That Won’t Jam

We reviewed over 22 Hole Saw Kits and found the best one to be Milwaukee 49-22-4185.

At Hack My Garage, we don’t simply put the highest ticket items at the top. We spend hours researching the best options available and layout the good and the bad making your life easy.

The Milwaukee 49-22-4185 hole saw kit comes with 22 hole saws making it easy to cut any shape hole you need. You’ll also have the luxury of using one mandrel which lets you swap out hole saws without much effort.

If you’re working with metal, you’re going to want to go with the Greenlee Carbide Cttr.

If you’re an electrician, plumber, or want to read the reviews, keep reading to find the best hole saw kit for you.

The 9 Best Hole Saw Kits

IMAGEPRODUCTPIECESPRICE
Milwaukee 49-22-418522 CHECK PRICE
Greenlee Carbide Cttr5 CHECK PRICE
Diablo DHS14SGP14 CHECK PRICE
HSS Hole Saw Kits15 CHECK PRICE
Bosch HDG1110 CHECK PRICE
Freud DHS17SPL17 CHECK PRICE
DEWALT Electrician's Set6 CHECK PRICE
Hole Saw Set HYCHIKA19 CHECK PRICE
LENOX 13-Piece Bi-Metal 13 CHECK PRICE

Best Hole Saw Kit

Milwaukee 49-22-4185

Milwaukee 49-22-4185
Hole Saw Sizes3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″, 2-5/8″, 3″, 3-1/4″, 3-3/8″, 3-5/8″, 3-3/4″, 4-1/8″, 4-1/4″, 4-1/2″, 4-3/4

If you’re looking for the best hole saw kit that won’t jam up on you after a single use, the Milwaukee 49-22-4185 hole saw kit is what you’re after.

You’ll be able to choose between 22 different hole saw sizes. When you start a new DIY project, you’ll likely need a few different hole saw sizes. This kit makes your life easier when it provides you with a wide variety of hole saws suitable for any project.

Only one mandrel is required to make use of this hole saw kit. You aren’t going to need to buy three separate items to drill one hole, you’ll have everything you need right in reach.

Cheaper hole saw kits end up jamming up on you after a few uses. The hole saw will get insanely hot, and you’ll be left with a half sawed hole and a head filled with frustration. When you invest your money into quality tools, you won’t have to worry about them giving out on you after a single use.

The Milwaukee 49-22-4185 hole saw kit is perfect for a beginner or intermediate woodworker who is looking to up their toolbox’s arsenal. If you’re after something that cuts straight through metal, check out the review below.

Pros
  • 22 different hole saws for any project
  • Quality brand that will last
Cons
  • Not suitable for cutting through strong metal

Best Hole Saw Kit for Metal

Greenlee Carbide Cttr

Hole Saw Sizes7/8 inch, 1-1/8 inch, 1-3/8 inch, 1-3/4 inch, and 2 inch

Need to cut straight through stainless steel? The Greenlee Carbide Cttr is the best hole saw kit for metal.

If you’re cutting through metal, you aren’t playing around. You need your hole saw to require a quick oil and then slice through metal like butter. You’re going to get exactly that with the precision carbide teeth that these carbide tipped hole saws provide.

This kit is suitable for a professional (or DIYer) that needs their tools to be worth their weight. You won’t get the same quality out of cheap, bi-metal made hole saw kits. You’re going to be replacing them before you know it, and this hole saw kit is going to last.

You won’t have to buy 10 different mandrels either, you can use the included Allen wrench to fit any hole saw to your drill. Most other kits come with a few different mandrels creating an annoying problem anytime you need to switch hole saws.

Think of it like this. You can buy 10 different sets for the same price, but they won’t outlast the quality that the Greenlee Carbide Cttr hole saw kit provides. Imagine you’re working on your next project, and SCREECH, the teeth are jammed, dull, and without any use. For that, check out the best impact wrenches.

Instead of putting your money into paperweights, put it into quality that lasts. These carbide tipped hole saws are a great choice for professionals out there.

Pros
  • Cuts straight through metal
  • Tough, will last a long while
Cons
  • Not meant for cutting wood

Best Budget Hole Saw Kit

Diablo DHS14SGP

Hole Saw Sizes7/8″,1″,1-1/8″,1-3/8″,1-1/2″,1-3/4″,2″,2-1/8″,2-1/2″

Budget doesn’t mean bad. You’re going to be pleased if you decide to go with the Diablo DHS14SGP budget hole saw kit.

Do you want to dig through your toolbox and find that mandrel you forget you had? Me neither. You’ll notice that this set comes with ONE mandrel. This is going to make your life a breeze when you’re able to swap out hole saws at a moment’s notice with one pilot bit.

This is the perfect set for a woodworking DIYer who doesn’t want to buy tons of separate hole saws. I think that if you’re new to the world of hole saws, you can’t go wrong with picking up one of these sets. You will need to check out the best vacuum cleaners to clean your garage after your job is done.

While Diablo claims this can cut metal, these hole saws are made out of bimetal. It’s not going to cut through stainless steel like butter, but if you go low and slow, you should be able to cut through thinner pieces of metal.

Don’t worry though, you’ll still be able to cut through plastic and wood without an issue. Make sure that you don’t force any pressure, and flip the material halfway through cutting the hole in so you can get a clean, perfectly round hole.

The Diablo DHS14SGP budget hole saw kit is the answer to your problems. If you’re just getting into the world of woodworking, it’s going to be hard to go wrong. It’s also a great accompaniment to the best drill press.

Pros
  • Great for a newbie
  • One mandrel for easy applications
Cons
  • Made from bimetal, likely won’t last if you want to cut metal

Best Budget Hole Saw Kit for Metal

HSS Hole Saw Kits

Hole Saw Sizes15mm/0.59″, 16mm/0.63″, 18mm/0.71″, 20mm/0.79″,21mm/0.83″, 22mm/0.87″, 25mm/0.98″, 26mm/1.02″, 28mm/1.10″, 30mm/1.81″, 35mm/1.38″, 40mm/1.57″, 45mm/1.77″, 50mm/1.97″, 53mm/2.09″

If you have no money at all but need to cut through metal right away, you’ll be glad to check out the HSS Hole Saw Kit.

For such a value, you’ll be given a variety of different sizes of hole saws to choose from. What’s crazy is you can spend the same amount this kit costs on just one hole saw! The quality will suffer a bit, but hey, you’ll get those holes drilled in a jiffy.

If you’re a professional, you’d better spend your money elsewhere. The benefit of these is that you know you’re not going to use the hole saw ever again. Think of them as a one-time use, and any more is going to be a bonus!

The HSS Hole Saw Kit is going to suit you well if you’re on a tight budget but need to finish your DIY project without breaking the bank. If you need to cut through some kegs or the side of a PC case for exhaust fans, you shouldn’t have much trouble getting that done.

Pros
  • Cheap as heck
  • Great for one or two uses
Cons
  • Not going to last long at all

Best Diamond Hole Saw Kit

Bosch HDG11

Hole Saw Sizes 1/4 inch, 5/16 inch, 3/8 inch, 5/8 inch, 1 inch, 1-3/8 inch, 2 inch, 2-1/4 inch, 2-1/2 inch

If you need to cut through granite, slate, marble, or tile (and more) like butta, you’ll be pleased with these ice hardened hole saw kit.

Spray on some water and you’ll be cutting holes in extremely hard material in no time. The segmented teeth will prevent the hole saw from getting extremely hot and making it unsafe to use. You’ll be able to get clean cuts if you’re patient and keep the hole wet as described.

One mandrel makes your life a lot easier so you won’t need to waste time when you need to change out hole saws quickly. You’ll save time and energy when the job you need to get done is finished before you know it.

Low-quality diamond hole saws will need to be replaced after a few uses. You’ll save money when you won’t need to be buying a new hole saw set every few months. If you’re worried about this giving out on you, purchasers were extremely satisfied with their purchase.

If you’re a professional or even a DIYer, this product is made for you. I think that out of all the diamond hole saw sets I found, this one was hard to beat. You don’t want to skimp out on your tools when you need them to hold up during heavy-duty jobs.

Pros
  • Cuts through extremely hard materials
  • Great for professional usage
Cons
  • Hard to find any! Great product

Best Hole Saw Kit for Plumbers

Freud DHS17SPL

amazon.com/Freud-DHS17SPL-Bi-Metal-Plumbing-Piece/dp/B0778PSFB9?crid=EE8V6DUN5L6X&dchild=1&keywords=hole+saw+kit&qid=1613745522&sprefix=hole+saw%2Caps%2C326&sr=8-10&linkCode=ll1&tag=hackmygarag02-20&linkId=ee076b0f148e2b04f1c90b53f3258cc2&language=en_US&ref_=as_li_ss_tl(opens in a new tab)

Freud DHS17SPL
Hole Saw Sizes9/16-inch to 6-inch diameter

If you’re a plumber, you DON’T want to prolong a job because your hole saws gave out on you. This kit is reliable and will be your daily driver whenever you need to cut holes through plastic, wood, and thin metals.

The snap-lock system makes it incredibly simple to swap out hole saws when you need them. You won’t have to deal with mismatching hole saws and mandrels, all of your hole saws snap right into place.

Poor quality hole saw sets will make it harder to do your job, and you won’t need to worry about constant jamming and heat problems when you invest in this set. It comes in a case too, so you can finally get and stay organized.

This will become your best friend when you won’t need to get frustrated when your dull hole saws from daily use aren’t reliable anymore. You’ll have every size hole saw you need and it’ll make cutting holes enjoyable with power tools rather than a frustrating mess.

If you’re a plumber, you might as well invest in something that will last you for years to come. It’s hard to go wrong with this bi metal hole saw kit. The hard plastic carrying case is also a great feature that you’ll be able to enjoy when going to and from work.

Best Hole Saw Kit for Electricians

DEWALT Electrician’s Set

DEWALT Electrician's Set
Hole Saw Sizes7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″

As an electrician, you need the right hole saw set to cut through wood and metal at a moment’s notice. You need your wires and PVC piping to be an easy job, not a hassle. That’s where this hole saw kit for electricians comes in.

You’re looking for a new hole saw set likely because yours is giving out after years of use. DeWalt patented toothforms ensure that these will last and won’t need to be replaced after a few uses. It’ll pay for itself when you’ve been using this set for years to come.

The fast plug ejection makes it incredibly easy to swap out the hole saws with the pilot bit. You can go from 2″ to 1-1/8″ in a jiffy.

One thing about this product is that it is created out of Bimetal, so don’t expect it to perform any miracles. It will be able to do about any basic job you need and do it well. The best part about this kit is that it’s inexpensive but still capable of performing.

If you’re an electrician that needs a reliable hole saw kit but doesn’t want to break the bank, this set is for you. It won’t be cutting through granite or thick steel, but that’s not what being an electrician requires.

You won’t be disappointed and it also comes with a satisfaction guarantee.

Pros
  • Perfect for electricians
  • Inexpensive
Cons
  • Won’t cut through thick metal reliably

Best Budget Hole Saw Kit for Wood

Hole Saw Set HYCHIKA

Hole Saw Sizes3/4″ (19mm), 7/8″ (22mm), 1-1/8″ (28mm), 1-1/4″ (32mm), 1-1/2″ (38mm), 1-3/4″ (44mm), 2″ (51mm), 2-1/2″ (64mm), 3″ (76mm), 3-1/2″ (89mm), 4″ (102mm), 5″ (127mm), 6″(152mm)

If you’re new to DIYing and don’t want to spend a bunch of money, you can test the waters with this hole saw kit. It comes with 13 hole saws, it’s a great way to dip your toes into the world of drilling holes.

This is suitable for cutting through soft woods, plywood, plastic but is NOT meant for cutting through metal. You’ll have to spend a bit more money to get something suitable for cutting through metal, but be aware this kit isn’t made for that purpose.

You do get what you pay for, and I wouldn’t expect this set to last you for years to come BUT purchasers loved this product anyway. It’s such a bargain that even if it’s totally bogus (which it isn’t), you aren’t out of much cash. I love the interchangeable pilot bit as well.

Get used to using hole saws with this kit, it’s a great beginner set to get started. With so many great reviews, you’re in good hands.

Pros
  • Extremely cheap
  • Great for beginners
Cons
  • Not going to last the test of time

Best Hole Saw Kit for Wood and Metal

LENOX 13-Piece Bi-Metal

LENOX 13-Piece Bi-Metal
Hole Saw Sizes3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″ 2″, 2-1/4″ 2-1/2″

It’s hard to find a hole saw set that’s both great at cutting wood AND metal, this set solves that problem.

The 9 hole saws included will allow you to cut through any metal or wood that stands in your way. The non-binding coating also makes your cuts faster, meaning you’ll have to deal with less jamming and hot tools when you need to remove material after cutting a hole.

It also comes with a split point drill bit which will make it easier for you to penetrate the material you’re cutting a hole through. You’re going to want to easily cut the hole as putting extra pressure on the drill can become dangerous, fast.

You won’t need any tools to replace the hole saws, they lock right in. The two mandrels included will make changing out hole saws a breeze since they all fit right into place.

Cutting wood and metal shouldn’t be a problem with this hole saw kit. If you’re a professional or just a new DIYer that needs an all-in-one solution, you’ll be pleased with this set.

Pros
  • LENOX is a great brand
  • Cuts through wood and metal, hard to find hole saws that do both
Cons
  • Likely not amazing at cutting wood or metal, but it can do both relatively well

Hole Saw Kit FAQ

Does it Matter What Material Hole Saws Are Made Out Of?

If you’re going to be doing woodwork or need to cut holes through thin metal, then you can get away with using a lesser bi-metal hole saw kit. You’ll find that if you want to cut through thick metal, then bi-metal won’t cut it.

Your other options are to use a heavy carbide tooth hole saw if you’re cutting through metal. If you’re wanting to cut through ceramic, porcelain, or other hard tiles, then you should go with a diamond-tipped hole saw kit.

Another option for tile cutting would be the best tile saw.

How Do You Attach a Hole Saw?

To attach a hole saw to your drill, you’ll take your arbor and slide it through the hole saw. You tighten down the arbor as much as you can to secure it. You then line up the arbor through the secure holes and tighten it down on the back.

Then you attach the drill bit to your drill, tighten it down as much as possible and you’re good to go to drill holes.

Will a Diamond Hole Saw Cut Steel?

Diamon hole saws are NOT recommended to cut through steel. You may think they’re great at cutting metal, but they’re great at cutting through tiles, ceramics, and porcelain.

For steel cutting, you want to go with HSS and carbide hole saw kits.

Different Types of Hole Saws

Carbide

Carbon hole saw kits are great at cutting through metal with ease. They are pricier than their bi-metal counterparts but they can achieve much more when doing heavy-duty work.

Bi-metal

Bi-metal hole saws are a great option for a beginner doing light woodworking or plastic cutting. They aren’t suitable for cutting through metal and should be looked at as an entry-level option rather than a work solution.

Diamond tipped

Diamond tipped hole saws are going to be able to withstand high heat which will make them great at cutting through porcelain and ceramic tiles.

Tungsten

Tungsten hole saws are a great multi-purpose solution. They can cut through wood, plastic and tile without any issue.

What to Look For in Hole Saws

Suitable for your material

When purchasing your hole saw kit, you’ll want to ensure that it is suitable for your cutting requirements. If you’re doing wood projects, then you’ll require a different hole saw than if you were drilling holes out of metal.

Reliable

Poorly made hole saws are known for jamming up and getting super hot. You want to ensure that the hole saw you’re using is going to hold up through the years. You can do this by picking up a set from a manufacturer you trust rather than a no-name brand without any reputation.

Ease of use

If you’re going to be using different sized hole saws, then you’ll want to make sure that you’re buying a kit with one mandrel/arbor or pilot bit. This way, you won’t want to rummage through your carrying case every time you want to change out the size.

Final Thoughts

If you’re new to hole saw kits and are looking to cut through wood with ease, you can’t go wrong with the Milwaukee 49-22-4185 hole saw kit. If you’re wanting to cut through metal, then the Greenlee Carbide kit is another great option.

If you’re needing to cut through tile, then you may want to check out our buying guide for the best wet tile saw.

About Roy Cohen

I'm Roy, founder of Hack My Garage. I started out like most not knowing how to hammer a nail, but now I know more than most people about home improvement and DIY. I want to spread my wealth of knowledge with the world and hope to make it a better place.