The 7 Best PVC Pipe Cutters That Slice

After hours of research, we found the best PVC pipe cutter to be the RIDGID 23498.

At Hack My Garage, we don’t simply put the highest ticket items at the top. We spend hours researching the best options available and layout the good and the bad making your life easy.

You’ll be able to enjoy the ratcheting mechanism that makes cutting PVC a breeze, plus it has a replaceable blade that makes it last a lifetime. If that’s not enough, the RIDGID 23498 comes with a lifetime warranty.

If you’re on a budget or are looking for a tube cutter, you’re going to need a different tool. For that, check out the reviews below to satisfy your needs.

If you’re ready to find the best PVC pipe cutters for you, then look no further.

The Best PVC Pipe Cutters

Best Overall PVC Pipe Cutter

RIDGID 23498

  • Replaceable Blade: Yes
  • Cuts: PVC, CPVC, PP, PEX, PE, rubber hose, multilayer tubing
  • Warranty: Lifetime Warranty

This RIGID pipe cutter will make your job a whole lot easier. You’ll be able to cleanly cut any PVC pipe with ease leaving behind no burrs. This is one of the best PVC pipe cutters around.

With its 1/8-inch to 1-5/8-inch cutting capacity and ratcheting mechanism, all you need to do is place the pipe in the chamber and start squeezing the spring-loaded handles. One-Two-Three, you’re done! You’ll have no burrs left over to clean and you won’t need to waste your precious energy using a hand saw giving you an inaccurate cut.

When you buy cheap PVC pipe cutters, you won’t get a replaceable blade. Over time it’ll dull, making it a big paperweight. This tool comes with a replaceable blade AND spring should you need to buy replacement parts. You’ll save tons of money when you invest in the best and won’t need to buy new tools every few years.

The best part about this PVC pipe cutter is that it comes with a lifetime warranty. You won’t need to worry about it breaking on you or being made from cheap parts. I think you won’t have any regrets going with this tool, purchasers love it. Since it’s such a high-quality product, you won’t ever need to buy another PVC cutter again.

Pros
  • Lifetime Warranty
  • Replaceable Blade
  • Quick, easy cuts
Cons
  • Might limit you on the size, double check what size you need before purchasing

Best PVC Pipe Cutter Alternative

RIDGID Tube Cutter

  • Replaceable Blade: Yes
  • Cuts: Metal/Plastic
  • Warranty: Yes

This pipe and tubing cutter will slice through STEEL. You won’t need to fiddle with any mechanisms or doo-dads, this tube cutter will cut metal and plastic without an issue.

If you’ve never used one of these before, you start by tightening it down, then turning the tube cutter 360 degrees around the pipe. This makes it easier for the blade to stay where you want it. You tighten it down a bit more, a few turns more, and your pipes are cut!

This tool will last you forever. You’ll be able to replace the blade if you need and it also comes with a lifetime warranty. In my opinion, you might be better off with one of these instead of buying different-sized pipe cutters. In the end, you’ll only need to rely on one tool and it’ll make precise cuts.

The X-CEL knob and wheel pin make it incredibly easy to prep and cut the pipe you’re working with. You won’t need to get frustrated with a tiny knob that’s hard to grip, this was ergonomically designed so you can tighten it exactly where you need.

It’s probably a bit overkill if you need to just cut PVC pipe, but if you’re working and need to cut metal and plastic, I would go with this option. Purchasers had a ton of great things to say about this PVC tube cutter, and with a lifetime warranty, it’s hard to say no.

Pros
  • Cuts metal and plastic
  • Lifetime Warranty
  • Lasts a long time
Cons
  • None, you’ll love this product

Also Great PVC Pipe Cutter

DUEBEL PVC Pipe Cutter

  • Replaceable Blade: Yes
  • Cuts: PVC, CPVC, PE, PEX, PP, PPR, O.D. rubber hose , multilayer tubing.
  • Warranty: No

Thi PVC pipe cutter looks slick while still packing a punch. It has a 2.95″ outer diameter cutting capacity. You won’t be limited at all with this pipe cutter, it’ll cut nearly any size PVC you need.

What I like about this pipe cutter over the first option is that the blade has a Teflon coating. If you’re a plumber, pipes get wet, which leads to rust. Teflon is anti-corrosive meaning the blade won’t rust over time and become a piece of junk.

Cheap PVC cutters are going to end up costing more in the long run when the blades give out. You won’t be left high and dry when the blade starts getting dull on this pipe cutter. Pop in the replacement blade and you’ll be ready to rock and roll.

The aluminum non-slip handle will make it easy to hold when you start to use the ratcheting mechanism to cut your PVC piping. When you’re done, the safety mechanism prevents the spring from jumping at you. You’re gonna want to stay safe when you’re dealing with sharp tools and this ratcheting PVC pipe cutter does just that.

This tool is a bit cheaper than the other PVC pipe cutters but has a bigger cutting capacity and won’t rust up on you. I think that this is worth a look if you’re dealing with wet environments daily.

Pros
  • 2.95″ Cutting Capacity
  • Rustproof
  • Replaceable blade
Cons
  • Some purchasers mention the cuts aren’t completely straight, but it wasn’t that big of a deal

Best Budget PVC Pipe Cutter

Zantlea Pipe and Tube Cutter

  • Replaceable Blade: No
  • Cuts: O.D. PEX, PVC, PPR Pipe
  • Warranty: 1 Year Warranty

If you’re a newbie DIYer and don’t use a pipe cutter much, this tool is your best bet. It comes with a 1-1/4″ cutting capacity, ready-to-cut PVC piping, tubes, or hoses.

It doesn’t come with a replaceable blade, but the 2.5″ blade is imported from Japan and comes heat treated. You don’t want to have to cut the same hole twice, and the blade is sharp enough to cut cleanly through.

It comes with a ratchet mechanism which is amazing considering the price of this pipe cutter! You won’t have to expend a ton of energy when you’re cutting PVC pipe after PVC pipe, squeeze it a few times and you’ll be done. It’s perfect for one-handed use and this ratcheting PVC pipe cutter does the work for you.

It’s not made out of metal making this tool incredibly light. It also won’t rust on you and is sure to last making it money well spent. You’ll save while purchasing this pipe cutter, and if you’re not a professional it’s going to be sufficient enough if the pipes you’re cutting are under 1-1/4″.

Pros
  • Great budget PVC pipe cutter
  • Won’t rust on you
Cons
  • Could be too small for your needs

Best 1” PVC Pipe Cutter

LASCO Victor 13-2976

  • Replaceable Blade: Yes
  • Cuts: Plastic pipes
  • Warranty: 1 Year Warranty

This tool SCREAMS quality and purchasers were all on board with one thing: this pipe cutter was built to last.

It has a cutting capacity of 1/2-inch to 1-inch with a replaceable blade. You won’t have to worry about buying this pipe cutter twice, it’s not going to break on you. Get a few extra stainless steel blades and you’ll be set for life. You won’t have any problems with difficult-to-cut PVC pipes, this slices right through.

The ratchet mechanism makes it easy as heck to cut plastic pipe and tubing. The handles look extra comfy to use as well. The curved design will feel great in your hand when you’re cutting pipes all day.

It’s got a one-year warranty to sweeten up the deal, but frankly, it’s going to be hard to top this tool. You know this is made out of quality materials, and this pipe cutter looks like it’s going to last the test of time. All of the reviewers mention that it’s the “best pipe cutter ever” and had nothing bad to say.

You can go cheap when you buy tools or you can invest and save money in the long run. Nothing worse than having to pause a job because one of your tools gave out.

Pros
  • Quality that lasts
  • 1 Year Warranty
  • Steel Blade
Cons
  • None!

Best 1-½” PVC Pipe Cutter

RIDGID Single Stroke Plastic Pipe and Tubing Cutter

  • Replaceable Blade: Yes
  • Cuts: PVC, CPVC, PP, PEX, PE, multilayer tubing
  • Warranty: Lifetime Warranty

This pipe cutter is going to cut right through PVC pipe with its 1/8-inch to 1-3/8-inch cutting capacity. You won’t be left with any burrs leftover for cleanup making your life incredibly easy.

It’s designed to cut with a single stroke, unlike ratcheting mechanisms which require a few squeezes. It’ll cut right through PVC pipe with ease and you won’t need to put unnecessary stress on your hands. If you’re older and have arthritis, this could be a major help to relieving some pain off your hands.

The blade is also made out of replaceable hardened steel with a spring-loaded handle that will cut your PVC pipe however you need. Customers did mention that this tool felt a bit clunky in the hand, if you have small hands make sure you’re aware before purchasing.

This is a great choice if you don’t want to work with a ratcheting mechanism and want quick, clean cuts.

Pros
  • Replaceable blade
  • Made out of aluminum
Cons
  • Can feel bulky in the hands

Best 2” PVC Pipe Cutter

DUEBEL Up to 2.5″

  • Replaceable Blade: Yes
  • Cuts: plastic pipe,tube, poly vinyl, PVC, CPVC, PE, PEX, PP, PPR, O.D. ,rubber hose, multilayer tubing
  • Warranty: No

If you need a cutting capacity of 2.5″, this is the tool for you.

You won’t have any trouble when you need to cut pipes, the ratcheting mechanism makes it incredibly easy to do so. You won’t need to waste any energy and you’ll be left with a clean cut without any required cleanup.

The handle is made out of nonslip aluminum alloy making for an easy grip. You want it to fit nicely in the hand if you’re a plumber cutting pipes all day, you won’t have to deal with aching hands.

The SK5 steel blade is won’t rust on you, it’s coated with Teflon. One downside is that, unlike the 2.95″ model, it doesn’t come with a replaceable blade. If that’s a deal-breaker for you, then check out the DUEBEL Pipe Cutter.

The included safety features also ensure that the spring doesn’t pop at you. This tool will satisfy your needs if you need a 2.5″ PVC cutter. The blade will stay sharp and will get the job done.

Unfortunately, this item doesn’t come with replacement blades.

Pros
  • Safety features
  • Ratchet mechanism
Cons
  • No replaceable blade, can be a deal breaker

Wrapping it Up

Different jobs require different tools. Not all pvc pipe cutters are made the same.

If you’re a plumber, electrician, or DIYer looking to get your hands dirty. the RIDGID 23498 is going to be a great option for clean accurate cuts.

The thing is though, even if you decide to use a handheld device, the RIDGID Tube Cutter is likely going to be the best long-term choice. You’ll be able to cut through metal and PVC without spending too much more.

No matter what though, you’ll find the best pvc pipe cutters around on this list so you find the right pvc pipe cutter for you!

About Roy Cohen

I'm Roy, founder of Hack My Garage. I started out like most not knowing how to hammer a nail, but now I know more than most people about home improvement and DIY. I want to spread my wealth of knowledge with the world and hope to make it a better place.